Calibrate Your Amarok for a 140L Long Range Fuel Tank

Upgraded your Volkswagen Amarok NF V6 TDI600 with an aftermarket 140L long range fuel tank?

The 140L Long Range Fuel Tank Programmer recalibrates your Amarok's factory configuration to recognise the increased 140L fuel capacity, allowing the vehicle's fuel monitoring system to operate correctly with the larger tank.

It's a simple plug-and-play solution designed specifically for Amarok NF V6 TDI600 models that have been upgraded from the standard factory fuel tank to a compatible 140L long range tank.

Accurate Fuel Level & Distance to Empty

After installing a larger fuel tank, the vehicle's factory configuration may still be calibrated for the original tank capacity.

The OBD Programmer updates the required vehicle configuration for the 140L tank, helping provide accurate:

• Fuel gauge operation

• Fuel level calculations

• Distance to Empty (DTE) calculations

• Factory fuel monitoring information

No laptop. No coding. No complicated setup.

Plug & Play Programming

1. Turn the ignition ON.

2. Plug the OBD Programmer into the vehicle's OBD-II port.

3. The programmer backs up your vehicle's current configuration, identifies the required configuration and begins programming.

4. Wait for the LED to turn solid green.

5. Remove the programmer.

During programming, the instrument cluster and infotainment system may restart. This is completely normal. Do not unplug the OBD Programmer or switch the ignition off while programming is in progress.

Factory Roller Shutter Reset

If you have an Amarok Aventura or PanAmericana delivered with a factory roller shutter, you will need to reset the roller shutter after programming.

1. With the roller shutter fully open, press and hold the button until the roller shutter reaches half open.

2. Press and hold the button until the roller shutter reaches fully open. Continue pressing the button for at least 4 seconds.

3. Release the button.

4. Within 10 seconds of releasing the button, press and hold the button until the roller shutter fully closes. Continue pressing the button for at least 4 seconds.

5. If the roller shutter does not open when you press the button, repeat the procedure.

Restore Back to Factory Anytime

During the first programming session, the OBD Programmer securely stores the vehicle's original factory configuration, allowing the vehicle to be restored back to its original settings at any time by plugging the programmer back into the same vehicle.

Vehicle Compatibility

Volkswagen Amarok NF – 2023+
V6 TDI600 Diesel Models Only

Designed for Volkswagen Amarok NF models fitted with a compatible aftermarket 140L long range fuel tank.

Not compatible with 2.0L TDI405 or TDI500 Amarok models.